Roof screeds & floor build-ups
Lightweight falls that double as a continuous insulation layer, without loading the slab.
Fill & screed grades
Leca Fill 3–10
Product code ALF-0310
The standard grade for roof screeds and void filling.
3–10 mm at 380–450 kg/m³, laid dry or bound with a cement slurry.
- Grain size
- 3–10 mm
- Loose bulk density
- 380–450 kg/m³
Description
For roof falls, filling between joists and floating floor build-ups. Laid dry it goes down fast and takes light traffic the same day.
Documents for this grade
Packaging & shipping
- Bulk tipper 60–90 m³
- Big bag 1 m³
- Sack 50 L
Standards
- EN 13055-1
Technical data
| Grain size | 3–10 mm |
|---|---|
| Loose bulk density | 380–450 kg/m³ |
| Particle density | 750 kg/m³ |
| Crushing resistance | 1.9 MPa |
| Thermal conductivity | 0.105 W/m·K |
| Water absorption (24 h) | 15 % |
| pH | 7.6 |
| Fire resistance | 1150 °C |
Values published in datasheets are typical production values within the stated tolerance band. They do not replace engineering design, mix-design trials, or the requirements of a project specification.
Applications
Thermal insulation
A mineral, non-combustible insulant with no performance loss over the building's life.
Related grades
Fill & screed grades
Leca Fill 0–3
The fine fraction for lightweight blocks, mortars and floor screeds.
- Grain size
- 0–3 mm
- Loose bulk density
- 550–650 kg/m³
Get a quotation for your project
Send us the specification, the volume you need and the delivery point. Our technical sales desk replies within one working day.